Words of encouragement
Congratulations on reaching the end of the longest chapter in the tutorials! Unless you have previous programming experience, this chapter was probably the most challenging one so far. If you made it this far, you’re doing great!
The good news is that the next chapter is easy in comparison. And in the chapter beyond that, we reach the heart of the tutorials: Object-oriented programming!
Chapter summary
Arrays allow us to store and access many variables of the same type through a single identifier. Array elements can be accessed using the subscript operator ([]). Be careful not to index an array out of the array’s range. Arrays can be initialized using an initializer list or uniform initialization.
Fixed arrays must have a length that is set at compile time. Fixed arrays will usually decay into a pointer when evaluated or passed to a function.
Loops can be used to iterate through an array. Beware of off-by-one errors, so you don’t iterate off the end of your array. Range-based for-loops are useful when the array hasn’t decayed into a pointer.
Arrays can be made multidimensional by using multiple indices.
Arrays can be used to do C-style strings. You should generally avoid these and use std::string_view and std::string instead.
Pointers are variables that store the memory address of (point at) another variable. The address-of operator (&) can be used to get the address of a variable. The indirection operator (*) can be used to get the value that a pointer points at.
A null pointer is a pointer that is not pointing at anything. Pointers can be made null by initializing or assigning the value nullptr to them. Avoid the NULL macro. Indirection through a null pointer can cause bad things to happen. Deleting a null pointer is okay (it doesn’t do anything).
A pointer to an array doesn’t know how large the array it is pointing to is. This means sizeof() and range-based for-loops won’t work.
The new and delete operators can be used to dynamically allocate memory for a pointer variable or array. Although it’s unlikely to happen, operator new can fail if the operating system runs out of memory. If you’re writing software for a memory-limited system, make sure to check if new was successful.
Make sure to use the array delete (delete[]) when deleting an array. Pointers pointing to deallocated memory are called dangling pointers. Using the wrong delete, or indirection through a dangling pointer causes undefined behavior.
Failing to delete dynamically allocated memory can result in memory leaks when the last pointer to that memory goes out of scope.
Normal variables are allocated from limited memory called the stack. Dynamically allocated variables are allocated from a general pool of memory called the heap.
A pointer to a const value treats the value it is pointing to as const.
int value{ 5 };
const int* ptr{ &value }; // this is okay, ptr is pointing to a "const int"
A const pointer is a pointer whose value can not be changed after initialization.
int value{ 5 };
int* const ptr{ &value }; // ptr is const, but *ptr is non-const
A reference is an alias to another variable. References are declared using an ampersand (&), but this does not mean address-of in this context. References are implicitly const -- they must be initialized with a value, and a new value can not be assigned to them. References can be used to prevent copies from being made when passing data to or from a function.
The member selection operator (->) can be used to select a member from a pointer to a struct. It combines both an indirection and normal member access (.).
Void pointers are pointers that can point to any type of data. Indirection through them is not possible directly. You can use static_cast to convert them back to their original pointer type. It’s up to you to remember what type they originally were.
Pointers to pointers allow us to create a pointer that points to another pointer.
std::array provides all of the functionality of C++ built-in arrays (and more) in a form that won’t decay into a pointer. These should generally be preferred over built-in fixed arrays.
std::vector provides dynamic array functionality, handles its own memory management and remembers its size. These should generally be favored over built-in dynamic arrays.
Thanks to iterators, we don’t have to know how a container is implemented to loop through its elements.
The algorithms library helps us to save a lot of time by providing many off-the-shelf functions. In combination with iterators (and later lambdas), the algorithms library is an important part of C++.
Quiz time
To make the quizzes a little easier, we have to introduce a couple of new algorithms.
std::reduce applies a function, by default the + operator, to all elements in a list, resulting in a single value. When we use the + operator, the result is the sum of all elements in the list. Note that there’s also std::accumulate. std::accumulate cannot be parallelized, because it applies the function left-to-right. std::reduce segments the list, which means that the function is applied in an unknown order, allowing the operation to be parallelized. If we want to sum up a list, we don’t care about the order and we use std::reduce.
Author’s note
std::reduce is currently not fully implemented in all major standard libraries. If it doesn’t work for you, fall back to std::accumulate.
std::shuffle takes a list and randomly re-orders its elements. We covered std::mt19937 in lesson 7.19 -- Generating random numbers using Mersenne Twister.
#include <algorithm> // std::shuffle
#include <array>
#include <ctime>
#include <iostream>
#include <numeric> // std::reduce
#include <random>
int main()
{
std::array arr{ 1, 2, 3, 4 };
std::cout << std::reduce(arr.begin(), arr.end()) << '\n'; // 10
// If you can't use std::reduce, use std::accumulate. The 0 is the initial value
// of the result: (((0 + 1) + 2) + 3) + 4
std::cout << std::accumulate(arr.begin(), arr.end(), 0) << '\n'; // 10
std::mt19937 mt{ static_cast<std::mt19937::result_type>(std::time(nullptr)) };
std::shuffle(arr.begin(), arr.end(), mt);
for (int i : arr)
{
std::cout << i << ' ';
}
std::cout << '\n';
return 0;
}
Possible output
10
10
2 1 4 3
Pretend you’re writing a game where the player can hold 3 types of items: health potions, torches, and arrows. Create an enum to identify the different types of items, and an std::array to store the number of each item the player is carrying (the enumerators are used as indexes of the array). The player should start with 2 health potions, 5 torches, and 10 arrows. Write a function called countTotalItems() that returns how many items the player has in total. Have your main() function print the output of countTotalItems() as well as the number of torches.
Show Solution
#include <array>
#include <numeric> // std::reduce
#include <iostream>
// We want to use ItemTypes to index an array. Use enum rather than enum class.
enum ItemTypes
{
item_health_potion,
item_torch,
item_arrow,
max_items
};
using inventory_t = std::array<int, ItemTypes::max_items>;
int countTotalItems(const inventory_t& items)
{
return std::reduce(items.begin(), items.end());
}
int main()
{
inventory_t items{ 2, 5, 10 };
std::cout << "The player has " << countTotalItems(items) << " item(s) in total.\n";
// We can access individual items using the enumerators:
std::cout << "The player has " << items[ItemTypes::item_torch] << " torch(es)\n";
return 0;
}
Write the following program: Create a struct that holds a student’s first name and grade (on a scale of 0-100). Ask the user how many students they want to enter. Create a std::vector to hold all of the students. Then prompt the user for each name and grade. Once the user has entered all the names and grade pairs, sort the list by grade (highest first). Then print all the names and grades in sorted order.
For the following input:
Joe
82
Terry
73
Ralph
4
Alex
94
Mark
88
The output should look like this:
Alex got a grade of 94
Mark got a grade of 88
Joe got a grade of 82
Terry got a grade of 73
Ralph got a grade of 4
You can assume that names don’t contain spaces and that input extraction doesn’t fail.
Show Solution
#include <algorithm> // std::sort
#include <cstddef> // std::size_t
#include <iostream>
#include <string>
#include <vector>
struct Student
{
std::string name{};
int grade{};
};
int getNumberOfStudents()
{
int numberOfStudents{};
do
{
std::cout << "How many students do you want to enter? ";
std::cin >> numberOfStudents;
} while (numberOfStudents <= 0);
return numberOfStudents;
}
std::vector<Student> getStudents()
{
using vector_type = std::vector<Student>;
int numberOfStudents{ getNumberOfStudents() };
// Create a vector with numberOfStudents elements.
vector_type students(static_cast<vector_type::size_type>(numberOfStudents));
int studentNumber{ 1 };
for (auto& student : students)
{
std::cout << "Enter name #" << studentNumber << ": ";
std::cin >> student.name;
std::cout << "Enter grade #" << studentNumber << ": ";
std::cin >> student.grade;
++studentNumber;
}
return students;
}
// Pass by reference to avoid slow copies.
bool compareStudents(const Student& a, const Student& b)
{
return (a.grade > b.grade);
}
int main()
{
auto students{ getStudents() };
std::sort(students.begin(), students.end(), compareStudents);
// Print out all the names
for (const auto& student : students)
{
std::cout << student.name << " got a grade of " << student.grade << '\n';
}
return 0;
}
Write your own function to swap the value of two integer variables. Write a main() function to test it.
Show Hint
Hint: Use reference parameters
void swap(int& a, int& b)
Show Solution
#include <iostream>
// Use reference parameters so we can modify the values of the arguments passed in
void swap(int& a, int& b)
{
// Temporarily save value of a
int temp{ a };
// Put value of b in a
a = b;
// Put previous value of a in b
b = temp;
}
int main()
{
int a{ 6 };
int b{ 8 };
swap(a, b);
if (a == 8 && b == 6)
std::cout << "It works!\n";
else
std::cout << "It's broken!\n";
return 0;
}
Write a function to print a C-style string character by character. Use a pointer to step through each character of the string and print that character. Stop when you hit the null terminator. Write a main function that tests the function with the string literal “Hello, world!”.
Show Hint
Hint: Use the ++ operator to advance the pointer to the next character.
const char* str{ "Hello, world!" };
std::cout << *str; // H
++str;
std::cout << *str; // e
// ...
Show Solution
#include <iostream>
// str will point to the first letter of the C-style string.
// Note that str points to a const char, so we can not change the values it points to.
// However, we can point str at something else. This does not change the value of the argument.
void printCString(const char* str)
{
// While we haven't encountered a null terminator
while (*str != '\0')
{
// print the current character
std::cout << *str;
// and point str at the next character
++str;
}
}
int main()
{
printCString("Hello world!");
std::cout << '\n';
return 0;
}
What’s wrong with each of these snippets, and how would you fix it?
a)
int main()
{
int array[]{ 0, 1, 2, 3 };
for (std::size_t count{ 0 }; count <= std::size(array); ++count)
{
std::cout << array[count] << ' ';
}
std::cout << '\n';
return 0;
}
Show Solution
The loop has an off-by-one error, and tries to access the array element with index 4, which does not exist. The conditional in the for loop should use < instead of <=.
b)
int main()
{
int x{ 5 };
int y{ 7 };
const int* ptr{ &x };
std::cout << *ptr << '\n';
*ptr = 6;
std::cout << *ptr << '\n';
ptr = &y;
std::cout << *ptr << '\n';
return 0;
}
Show Solution
ptr is a pointer to a const int. You can’t assign the value 6 to it. You can fix this by making ptr non-const.
c)
void printArray(int array[])
{
for (int element : array)
{
std::cout << element << ' ';
}
}
int main()
{
int array[]{ 9, 7, 5, 3, 1 };
printArray(array);
std::cout << '\n';
return 0;
}
Show Solution
array decays to a pointer when it is passed to printArray(). Range-based for-loops can’t work with a pointer to an array because the size of the array isn’t known. One solution is to add a length parameter to function printArray(), and use a normal for loop. A better solution is to use std::array instead of built-in fixed arrays.
d)
int* allocateArray(const int length)
{
int temp[length]{};
return temp;
}
Show Solution
temp is a fixed array, but length is not a compile-time constant, so we can’t use length to create a C-style array. Variable temp will also go out of scope at the end of the function, the return value will be pointing to something invalid. temp should use dynamic memory allocation or be a std::vector.
e)
int main()
{
double d{ 5.5 };
int* ptr{ &d };
std::cout << ptr << '\n';
return 0;
}
Show Solution
You can’t make an int pointer point at a non-int variable. ptr should be of type double*.
Let’s pretend we’re writing a card game.
a) A deck of cards has 52 unique cards (13 card ranks of 4 suits). Create enumerations for the card ranks (2, 3, 4, 5, 6, 7, 8, 9, 10, Jack, Queen, King, Ace) and suits (clubs, diamonds, hearts, spades). Those enumerators will not be used to index arrays.
Show Solution
enum class CardSuit
{
club,
diamond,
heart,
spade,
max_suits
};
enum class CardRank
{
rank_2,
rank_3,
rank_4,
rank_5,
rank_6,
rank_7,
rank_8,
rank_9,
rank_10,
rank_jack,
rank_queen,
rank_king,
rank_ace,
max_ranks
};
b) Each card will be represented by a struct named Card that contains a rank and a suit. Create the struct.
Show Solution
struct Card
{
CardRank rank{};
CardSuit suit{};
};
c) Create a printCard() function that takes a const Card reference as a parameter and prints the card rank and suit as a 2-letter code (e.g. the jack of spades would print as JS).
Show Hint
Hint: Use a switch-statement.
Show Solution
void printCard(const Card& card)
{
switch (card.rank)
{
case CardRank::rank_2: std::cout << '2'; break;
case CardRank::rank_3: std::cout << '3'; break;
case CardRank::rank_4: std::cout << '4'; break;
case CardRank::rank_5: std::cout << '5'; break;
case CardRank::rank_6: std::cout << '6'; break;
case CardRank::rank_7: std::cout << '7'; break;
case CardRank::rank_8: std::cout << '8'; break;
case CardRank::rank_9: std::cout << '9'; break;
case CardRank::rank_10: std::cout << 'T'; break;
case CardRank::rank_jack: std::cout << 'J'; break;
case CardRank::rank_queen: std::cout << 'Q'; break;
case CardRank::rank_king: std::cout << 'K'; break;
case CardRank::rank_ace: std::cout << 'A'; break;
default:
std::cout << '?';
break;
}
switch (card.suit)
{
case CardSuit::club: std::cout << 'C'; break;
case CardSuit::diamond: std::cout << 'D'; break;
case CardSuit::heart: std::cout << 'H'; break;
case CardSuit::spade: std::cout << 'S'; break;
default:
std::cout << '?';
break;
}
}
d) A deck of cards has 52 cards. Create an array (using std::array) to represent the deck of cards, and initialize it with one of each card. Do this in a function named createDeck and call createDeck from main. createDeck should return the deck to main.
Hint: Use static_cast if you need to convert an integer into an enumerated type.
Show Solution
#include <array>
// We'll need these many more times, create an aliases.
using deck_type = std::array<Card, 52>;
using index_type = deck_type::size_type;
deck_type createDeck()
{
deck_type deck{};
// We could initialize each card individually, but that would be a pain. Let's use a loop.
index_type index{ 0 };
for (int suit{ 0 }; suit < static_cast<int>(CardSuit::max_suits); ++suit)
{
for (int rank{ 0 }; rank < static_cast<int>(CardRank::max_ranks); ++rank)
{
deck[index].suit = static_cast<CardSuit>(suit);
deck[index].rank = static_cast<CardRank>(rank);
++index;
}
}
return deck;
}
int main()
{
auto deck{ createDeck() };
return 0;
}
e) Write a function named printDeck() that takes the deck as a const reference parameter and prints the cards in the deck. Use a range-based for-loop. When you can printDeck with the deck you generated in the previous task, the output should be
2C 3C 4C 5C 6C 7C 8C 9C TC JC QC KC AC 2D 3D 4D 5D 6D 7D 8D 9D TD JD QD KD AD 2H 3H 4H 5H 6H 7H 8H 9H TH JH QH KH AH 2S 3S 4S 5S 6S 7S 8S 9S TS JS QS KS AS
If you used different characters, that’s fine too.
Show Solution
void printDeck(const deck_type& deck)
{
for (const auto& card : deck)
{
printCard(card);
std::cout << ' ';
}
std::cout << '\n';
}
f) Write a function named shuffleDeck to shuffle the deck of cards using std::shuffle. Update your main function to shuffle the deck and print out the shuffled deck.
Reminder: Only seed your random number generator once.
Show Solution
#include <algorithm> // for std::shuffle
#include <ctime> // for std::time
#include <random> // for std::mt19937
// ...
void shuffleDeck(deck_type& deck)
{
// mt is static so it only gets seeded once.
static std::mt19937 mt{ static_cast<std::mt19937::result_type>(std::time(nullptr)) };
std::shuffle(deck.begin(), deck.end(), mt);
}
int main()
{
auto deck{ createDeck() };
shuffleDeck(deck);
printDeck(deck);
return 0;
}
g) Write a function named getCardValue() that returns the value of a Card (e.g. a 2 is worth 2, a ten, jack, queen, or king is worth 10. Assume an Ace is worth 11).
Show Solution
#include <cassert>
int getCardValue(const Card& card)
{
switch (card.rank)
{
case CardRank::rank_2: return 2;
case CardRank::rank_3: return 3;
case CardRank::rank_4: return 4;
case CardRank::rank_5: return 5;
case CardRank::rank_6: return 6;
case CardRank::rank_7: return 7;
case CardRank::rank_8: return 8;
case CardRank::rank_9: return 9;
case CardRank::rank_10: return 10;
case CardRank::rank_jack: return 10;
case CardRank::rank_queen: return 10;
case CardRank::rank_king: return 10;
case CardRank::rank_ace: return 11;
default:
assert(false && "should never happen");
return 0;
}
}
a) Alright, challenge time! Let’s write a simplified version of Blackjack. If you’re not already familiar with Blackjack, the Wikipedia article for Blackjack has a summary.
Here are the rules for our version of Blackjack:
- The dealer gets one card to start (in real life, the dealer gets two, but one is face down so it doesn’t matter at this point).
- The player gets two cards to start.
- The player goes first.
- A player can repeatedly “hit” or “stand”.
- If the player “stands”, their turn is over, and their score is calculated based on the cards they have been dealt.
- If the player “hits”, they get another card and the value of that card is added to their total score.
- An ace normally counts as a 1 or an 11 (whichever is better for the total score). For simplicity, we’ll count it as an 11 here.
- If the player goes over a score of 21, they bust and lose immediately.
- The dealer goes after the player.
- The dealer repeatedly draws until they reach a score of 17 or more, at which point they stand.
- If the dealer goes over a score of 21, they bust and the player wins immediately.
- Otherwise, if the player has a higher score than the dealer, the player wins. Otherwise, the player loses (we’ll consider ties as dealer wins for simplicity).
In our simplified version of Blackjack, we’re not going to keep track of which specific cards the player and the dealer have been dealt. We’ll only track the sum of the values of the cards they have been dealt for the player and dealer. This keeps things simpler.
Start with the code you wrote in quiz #6. Create a function named playBlackjack(). This function should:
- Accept a shuffled deck of cards as a parameter.
- Implement Blackjack as defined above (note: you can define other functions to help with this).
- Returns
true if the player won, and false if they lost.
Also write a main() function to play a single game of Blackjack.
Show Solution
#include <algorithm> // std::shuffle
#include <array>
#include <cassert>
#include <ctime> // std::time
#include <iostream>
#include <random> // std::mt19937
enum class CardSuit
{
club,
diamond,
heart,
spade,
max_suits
};
enum class CardRank
{
rank_2,
rank_3,
rank_4,
rank_5,
rank_6,
rank_7,
rank_8,
rank_9,
rank_10,
rank_jack,
rank_queen,
rank_king,
rank_ace,
max_ranks
};
struct Card
{
CardRank rank{};
CardSuit suit{};
};
struct Player
{
int score{};
};
using deck_type = std::array<Card, 52>;
using index_type = deck_type::size_type;
// Maximum score before losing.
constexpr int g_maximumScore{ 21 };
// Minimum score that the dealer has to have.
constexpr int g_minimumDealerScore{ 17 };
void printCard(const Card& card)
{
switch (card.rank)
{
case CardRank::rank_2: std::cout << '2'; break;
case CardRank::rank_3: std::cout << '3'; break;
case CardRank::rank_4: std::cout << '4'; break;
case CardRank::rank_5: std::cout << '5'; break;
case CardRank::rank_6: std::cout << '6'; break;
case CardRank::rank_7: std::cout << '7'; break;
case CardRank::rank_8: std::cout << '8'; break;
case CardRank::rank_9: std::cout << '9'; break;
case CardRank::rank_10: std::cout << 'T'; break;
case CardRank::rank_jack: std::cout << 'J'; break;
case CardRank::rank_queen: std::cout << 'Q'; break;
case CardRank::rank_king: std::cout << 'K'; break;
case CardRank::rank_ace: std::cout << 'A'; break;
default:
std::cout << '?';
break;
}
switch (card.suit)
{
case CardSuit::club: std::cout << 'C'; break;
case CardSuit::diamond: std::cout << 'D'; break;
case CardSuit::heart: std::cout << 'H'; break;
case CardSuit::spade: std::cout << 'S'; break;
default:
std::cout << '?';
break;
}
}
int getCardValue(const Card& card)
{
switch (card.rank)
{
case CardRank::rank_2: return 2;
case CardRank::rank_3: return 3;
case CardRank::rank_4: return 4;
case CardRank::rank_5: return 5;
case CardRank::rank_6: return 6;
case CardRank::rank_7: return 7;
case CardRank::rank_8: return 8;
case CardRank::rank_9: return 9;
case CardRank::rank_10: return 10;
case CardRank::rank_jack: return 10;
case CardRank::rank_queen: return 10;
case CardRank::rank_king: return 10;
case CardRank::rank_ace: return 11;
default:
assert(false && "should never happen");
return 0;
}
}
void printDeck(const deck_type& deck)
{
for (const auto& card : deck)
{
printCard(card);
std::cout << ' ';
}
std::cout << '\n';
}
deck_type createDeck()
{
deck_type deck{};
// We could initialize each card individually, but that would be a pain. Let's use a loop.
index_type index{ 0 };
for (int suit{ 0 }; suit < static_cast<int>(CardSuit::max_suits); ++suit)
{
for (int rank{ 0 }; rank < static_cast<int>(CardRank::max_ranks); ++rank)
{
deck[index].suit = static_cast<CardSuit>(suit);
deck[index].rank = static_cast<CardRank>(rank);
++index;
}
}
return deck;
}
void shuffleDeck(deck_type& deck)
{
static std::mt19937 mt{ static_cast<std::mt19937::result_type>(std::time(nullptr)) };
std::shuffle(deck.begin(), deck.end(), mt);
}
bool playerWantsHit()
{
while (true)
{
std::cout << "(h) to hit, or (s) to stand: ";
char ch{};
std::cin >> ch;
switch (ch)
{
case 'h':
return true;
case 's':
return false;
}
}
}
// Returns true if the player went bust. False otherwise.
bool playerTurn(const deck_type& deck, index_type& nextCardIndex, Player& player)
{
while (true)
{
if (player.score > g_maximumScore)
{
// This can happen even before the player had a choice if they drew 2
// aces.
std::cout << "You busted!\n";
return true;
}
else
{
if (playerWantsHit())
{
int cardValue{ getCardValue(deck.at(nextCardIndex++)) };
player.score += cardValue;
std::cout << "You were dealt a " << cardValue << " and now have " << player.score << '\n';
}
else
{
// The player didn't go bust.
return false;
}
}
}
}
// Returns true if the dealer went bust. False otherwise.
bool dealerTurn(const deck_type& deck, index_type& nextCardIndex, Player& dealer)
{
// Draw cards until we reach the minimum value.
while (dealer.score < g_minimumDealerScore)
{
int cardValue{ getCardValue(deck.at(nextCardIndex++)) };
dealer.score += cardValue;
std::cout << "The dealer turned up a " << cardValue << " and now has " << dealer.score << '\n';
}
// If the dealer's score is too high, they went bust.
if (dealer.score > g_maximumScore)
{
std::cout << "The dealer busted!\n";
return true;
}
return false;
}
bool playBlackjack(const deck_type& deck)
{
// Index of the card that will be drawn next. This cannot overrun
// the array, because a player will lose before all cards are used up.
index_type nextCardIndex{ 0 };
// Create the dealer and give them 1 card.
Player dealer{ getCardValue(deck.at(nextCardIndex++)) };
// The dealer's card is face up, the player can see it.
std::cout << "The dealer is showing: " << dealer.score << '\n';
// Create the player and give them 2 cards.
Player player{ getCardValue(deck.at(nextCardIndex)) + getCardValue(deck.at(nextCardIndex + 1)) };
nextCardIndex += 2;
std::cout << "You have: " << player.score << '\n';
if (playerTurn(deck, nextCardIndex, player))
{
// The player went bust.
return false;
}
if (dealerTurn(deck, nextCardIndex, dealer))
{
// The dealer went bust, the player wins.
return true;
}
return (player.score > dealer.score);
}
int main()
{
auto deck{ createDeck() };
shuffleDeck(deck);
if (playBlackjack(deck))
{
std::cout << "You win!\n";
}
else
{
std::cout << "You lose!\n";
}
return 0;
}
Once you’ve solved the quiz, have a look at some of the most common mistakes:
Show Hint
Hint:
Random number generation
If your Mersenne twister is non-static, it will be seeded every time shuffleDeck gets called. If shuffleDeck gets called twice in one second, it will produce exactly the same result. Don’t re-seed a random number generator unless you want to reset it.
void shuffleDeck(deck_type& deck)
{
/* static */ std::mt19937 mt{ static_cast<std::mt19937::result_type>(std::time(nullptr)) }; // non-random
static std::mt19937 mt{ static_cast<std::mt19937::result_type>(std::time(nullptr)) }; // random
std::shuffle(deck.begin(), deck.end(), mt);
}
Magic numbers
If your code contains the numbers 10, 11, 17, 21, or 52 inside the body of a function, you got magic numbers that should be removed.
If you used 10 or 11, you probably didn’t use getCardValue to get the value of the card. Also, to check if a card is an ace, don’t check its value, check its rank.
If you used 17 or 21, these should be constexpr variables to allow fast changes to the game’s configuration and make your code easier to read.
If you used 52, you should use deck.size() instead.
b) Extra credit: Critical thinking time: Describe how you could modify the above program to handle the case where aces can be equal to 1 or 11.
It’s important to note that we’re only keeping track of the sum of the cards, not which specific cards the user has.
Show Solution
One way would be to keep track of how many aces the player and the dealer got dealt (In the Player struct, as an integer). If either the player or dealer go over 21 and their ace counter is greater than zero, you can reduce their score by 10 (convert an ace from 11 points to 1 point) and “remove” one from the ace counter. This can be done as many times as needed until the ace counter reaches zero.
c) In actual blackjack, if the player and dealer have the same score (and the player has not gone bust), the result is a tie and neither wins. Describe how you’d modify the above program to account for this.
Show Solution
playBlackjack() currently returns true if the player wins and false otherwise. We’ll need to update this function to return three possibilities: Dealer win, Player win, tie. The best way to do this would be to define an enumeration for these three options, and have the function return the appropriate enumerator:
enum class BlackjackResult
{
player_win,
dealer_win,
tie
};
BlackjackResult playBlackjack(const deck_type& deck);
